Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Jeep Renegade
    4. : Shift knob

Jeep Renegade - Shift knob

Shift Knob Jeep Renegade (2014-2026 / 520, mk 1, bu)

Jeep Renegade (2014-2026 / 520, MK 1, BU)
How to replace the gear knob of the Jeep Renegade
Today's guide will show us how to disassemble and replace the gear shift knob of the Jeep Renegade, following the instructions below. First, we climb aboard …Read all…
Posted on 19 May 2024 by ScegliAuto
Jeep Renegade (2014-2026 / 520, MK 1, BU)
How to Replace the Gear Knob on the Jeep Renegade
To replace the gear knob on the Jeep Renegade, you will need: a 10 mm socket spanner, a small screwdriver, a utility knife, and long-nose pliers. The first …Read all…
Posted on 3 August 2026 by ScegliAuto
Jeep Renegade (2014-2026 / 520, MK 1, BU)
Replacing Gear Knob on Jeep Renegade
Using a sharp tool, remove the plate above the gear knob where the gears are marked. Once done, unscrew the now exposed nut with a small pliers, given the …Read all…
Posted on 9 May 2026 by ScegliAuto
Cigarette lighter (1) Airbag (9) Speaker (7) Air conditioning (2) Car stereo (14) Roof rack bars (1) Battery (10) Ignition coil (1) Air vents (2) Grille (1) Transmission (4) Body (8) Control unit (1) Key (45) Timing belt (5) V-belt (2) Onboard computer (15) Checks and maintenance (37) Oil pan (1) Dashboard (2) Brake rotors (1) Side marker light (1) Headlight (3) Tail light (7) Fog lights (7) Air filter (10) Cabin air filter (26) Fuel filter (1) Diesel fuel filter (2) Oil filter (6) Parking brake (9) Grille (3) Window switch (2) Light bulb (10) Side marker bulb (6) Headlight bulb (13) Tail light bulb (8) Interior dome light bulb (2) Instrument panel light (1) License plate light (9) (1) Rear window (1) Handle (3) Engine (1) Power window motor (1) Starter motor (1) Transmission fluid (3) Engine oil (11) Clock (9) Door trim panel (9) Front bumper (3) Rear bumper (2) Brake pads (3) Tires (3) Shift knob (3) Fuel pump (1) Car door (2) Instrument cluster (4) Wheel (1) Fuse box (15) Seat (1) Parking sensors (5) Door lock (1) Oxygen sensor (2) Side mirror (9) AdBlue warning light (1) Warning light – error code (16) (18) Tire pressure warning light (13) Service warning light (96) Fuel cap (7) Windshield wipers (5) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos