Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Jeep Renegade
    4. : Rear bumper

Jeep Renegade - Rear bumper

Jeep Renegade (2014-2023 / 520, BU, MK 1)
Jeep Renegade rear bumper removal instructions
In this video tutorial we will see the instructions that will allow us to remove the rear bumper of a Jeep Renegade. First of all we go to open the tailgate of …read all…
Posted on 28 February 2024 by ScegliAuto
Jeep Renegade (2014-2023 / 520, BU, MK 1)
Jeep Renegade rear bumper replacement
Open the boot lid and unscrew the t30 torx screws that secure the bumper to the boot itself. Then move on to the underside of the car and you will notice that …read all…
Posted on 30 December 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (7) Loudspeaker (5) Car stereo (9) Roof Rack Bars (1) Battery (12) Air Vents (2) Gearbox (3) Bodywork (5) Control unit (1) Key (29) Timing belt (3) -board computer (18) Checks and maintenance (88) Brake discs (1) Side indicator light (1) Headlight (2) Tail light (6) Fog lights (7) Air filter (7) Cabin air filter (19) Petrol filter (1) Diesel filter (1) Oil filter (5) Hand brake (4) Grille (2) Window lift switch (1) Accessory Kit (1) Light bulb (8) Side turn signal light bulb (6) Headlight bulb (11) Rear light bulb (6) Interior lights ceiling light bulb (2) Dashboard light (1) License plate light (7) Handle (2) Window motor (1) Starter motor (1) Gear oil (3) Engine oil (15) Door panel (8) Front bumper (3) Rear bumper (2) Brake pads (3) Tires (4) Gear Shift Knob (3) Door (2) Instrument cluster (21) Wheel (1) Fuse box (5) Seat (1) Parking sensors (5) Lock (2) Lambda sensor (1) Outside rearview mirror (8) Windscreen wipers (2) Steering wheel (1)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos