Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Jeep Renegade
    4. : Tail light

Jeep Renegade - Tail light

Jeep Renegade (2014-2023 / 520, BU, MK 1)
How to change the rear light on Jeep Renegade?
If we need to replace the rear light of the car, we can follow the instructions below for disassembly: first open the tailgate, locate the light to be …read all…
Posted on 4 December 2022 by ScegliAuto
Jeep Renegade (2014-2023 / 520, BU, MK 1)
How to remove the third stop on the Jeep Renegade
In this guide we will see the instructions that will allow us to remove the third stop light of the Jeep Renegade, in simple steps. First of all, open the boot …read all…
Posted on 3 March 2024 by ScegliAuto
Jeep Renegade (2014-2023 / 520, BU, MK 1)
Removing the Jeep Renegade rear light
In today's video we will see how to remove the rear light of a Jeep Renegade, in simple steps. First of all we open the tailgate of the trunk and we go to …read all…
Posted on 1 March 2024 by ScegliAuto
Jeep Renegade (2014-2023 / 520, BU, MK 1)
How to replace the rear light on a Jeep Renegade
Before we can start, we will have to go and open the tailgate of our Jeep Renegade. So let's start by disengaging and removing the internal side cover of the …read all…
Posted on 16 January 2024 by ScegliAuto
Jeep Renegade (2014-2023 / 520, BU, MK 1)
How to replace the rear light on a Jeep Renegade
How to remove the rear light on a Jeep Renegade? Let's see in this video how to disassemble the headlight and replace the bulbs. We open the bonnet of the …read all…
Posted on 28 November 2023 by ScegliAuto
Jeep Renegade (2014-2023 / 520, BU, MK 1)
How to change the rear light bulb on a Jepp Renegade
In this video we see how to change the rear light bulb of a Jeep Renegade, the operation is very fast and simple and does not require any special manual …read all…
Posted on 14 November 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (7) Loudspeaker (5) Car stereo (9) Roof Rack Bars (1) Battery (12) Air Vents (2) Gearbox (3) Bodywork (5) Control unit (1) Key (29) Timing belt (3) -board computer (18) Checks and maintenance (88) Brake discs (1) Side indicator light (1) Headlight (2) Tail light (6) Fog lights (7) Air filter (7) Cabin air filter (19) Petrol filter (1) Diesel filter (1) Oil filter (5) Hand brake (4) Grille (2) Window lift switch (1) Accessory Kit (1) Light bulb (8) Side turn signal light bulb (6) Headlight bulb (11) Rear light bulb (6) Interior lights ceiling light bulb (2) Dashboard light (1) License plate light (7) Handle (2) Window motor (1) Starter motor (1) Gear oil (3) Engine oil (15) Door panel (8) Front bumper (3) Rear bumper (2) Brake pads (3) Tires (4) Gear Shift Knob (2) Door (2) Instrument cluster (21) Wheel (1) Fuse box (5) Seat (1) Parking sensors (5) Lock (2) Lambda sensor (1) Outside rearview mirror (8) Windscreen wipers (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos