Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Jeep Renegade
    4. : Lambda sensor

Jeep Renegade - Lambda sensor

Jeep Renegade (2014-2023 / 520, BU, MK 1)
Where are the lambda probes located in the Jeep Renegade?
In this video we can see the position of the lambda probes in the Jeep Renegade and how to proceed in case we need to replace them. As shown, this model has …read all…
Posted on 28 July 2023 by ScegliAuto
Cigarette Lighter (1) Airbags (7) Loudspeaker (5) Car stereo (9) Roof Rack Bars (1) Battery (12) Air Vents (2) Gearbox (3) Bodywork (5) Control unit (1) Key (29) Timing belt (3) -board computer (18) Checks and maintenance (88) Brake discs (1) Side indicator light (1) Headlight (2) Tail light (6) Fog lights (7) Air filter (7) Cabin air filter (19) Petrol filter (1) Diesel filter (1) Oil filter (5) Hand brake (4) Grille (2) Window lift switch (1) Accessory Kit (1) Light bulb (8) Side turn signal light bulb (6) Headlight bulb (11) Rear light bulb (6) Interior lights ceiling light bulb (2) Dashboard light (1) License plate light (7) Handle (2) Window motor (1) Starter motor (1) Gear oil (3) Engine oil (15) Door panel (8) Front bumper (3) Rear bumper (2) Brake pads (3) Tires (4) Gear Shift Knob (2) Door (2) Instrument cluster (21) Wheel (1) Fuse box (5) Seat (1) Parking sensors (5) Lock (2) Lambda sensor (1) Outside rearview mirror (8) Windscreen wipers (2) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos