Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the Lambda Sensors in the Jeep Renegade?

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Oxygen sensor

In this video, see the location of the lambda sensors in the Jeep Renegade and how to proceed if you need to replace them. As shown, this model has two sensors: the first is located in the upper area of the exhaust manifold, while the second is positioned just after the joint of the manifold to the single pipe. You can access both sensors easily from the engine bay. To remove them, you will need a release spray and the specified tool, but in its absence, you can use a simple 22mm spanner.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the lambda sensor of a Jeep Renegade 1.6 MultiJet
How to replace the lambda sensor of a Jeep Renegade 1.6 MultiJet
Jeep Renegade (2014-2023 / ) Today we will see how to replace the lambda probe of a Jeep Renegade with a 1.6 MultiJet engine. Let's start the procedure by opening the engine comp…
Where are the Mirrors' Fuses in the Jeep Renegade?
Where are the Mirrors' Fuses in the Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this tutorial, you will see where the fuses for the external mirrors are located in the Jeep Renegade. These are the first components to check if …
What is the fuse diagram of the Jeep Renegade?
What is the fuse diagram of the Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video we can see where the fuse boxes of the Jeep Renegade are located and what are the corresponding diagrams, to consult in case we need to…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos