Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Renegade
    4. : How to replace glove box bulb in Jeep Renegade?

Jeep Renegade - Video tutorial

Model: Jeep Renegade 520, BU, MK 1 - Years 2014-2023
Part: Light bulb
Operation: How to replace glove box bulb in Jeep Renegade?

In this tutorial we can see how to replace the glove box bulb in your Jeep Renegade, a very simple and fast operation. First of all, position ourselves on the passenger seat, then open the drawer, empty it and, using a T25-tipped Torx screwdriver, unscrew the three screws located on the upper edge. We then disengage the side panel of the dashboard with the help of a plastic spatula, remove the fourth screw and separate the entire compartment from the support. We can now disconnect the power connector from the bulb, replace the bulb and reassemble everything.


Posted on 25 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Jeep Renegade 2014-2023 - How to change front turn signal bulb on Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - Where are the sidelights located in the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - Where to find a video to replace the parking lights of the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2021 - What bulbs are fitted to the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - How do you replace the parking lights on the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - What bulbs are needed for the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - How can I replace the LED sidelights on my Jeep Renegade? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos