Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Cabin air filter

With this guide, you will be able to replace the cabin air filter inside your 2016 Jeep Renegade in just a few minutes and without any difficulty. First, reach the passenger side and remove the mat located under the seat. Remove the plastic panel at the far right of the dashboard and unscrew the various screws located in the lower area of the glove compartment. Once done, remove the entire compartment and locate the filter box. Remove the cover and replace the old filter with the new one.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter in the 2016 Jeep Renegade?
How to Replace the Cabin Air Filter in the 2016 Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) In the 2016 Jeep Renegade, the cabin air filter is located under the dashboard on the passenger side, behind the glove compartment. The position of t…
How to Remove the Cabin Air Filter from a Jeep Renegade
How to Remove the Cabin Air Filter from a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Using a screwdriver, unscrew the securing screws of the glove compartment located under the dashboard. Remove the glove compartment using a lever (wh…
How to Replace the Cabin Filter on a Jeep Renegade
How to Replace the Cabin Filter on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video, we will show you how to remove the cabin air filter from a Jeep Renegade. Pry off the plastic cover located on the right side of the d…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos