Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulb on a Jeep Renegade?

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Light bulb

When one of the bulbs on the Jeep Renegade has blown, you can take the car to an auto electrician to have it replaced, but if you want to save some money, you can do it yourself. You will need to obtain an H4 bulb, which can be found almost anywhere for a few pounds, and proceed to remove the old one. To do this, first open the bonnet and locate the rear cover of the headlights; once done, open it and unclip the mechanism that holds the bulb in place, along with the electrical connector. To understand the procedure better, you can watch this video where all the steps are explained.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Position Light Bulb on a Jeep Renegade
How to Replace the Position Light Bulb on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) This guide shows how to replace the position light bulb on a Jeep Renegade. The first step is to turn the wheels to reveal a small access panel in th…
How to Replace the Fog Light Bulb on a Jeep Renegade
How to Replace the Fog Light Bulb on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video, learn how to replace the fog light bulb on a Jeep Renegade. Start by using a suitable screwdriver to remove the plastic cover located …
How to Replace the Front Headlight Bulb on a Jeep Renegade?
How to Replace the Front Headlight Bulb on a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the front headlight bulb on the Jeep Renegade, open the bonnet to access the rear of the headlight corresponding to the bulb that needs re…

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - How to change front turn signal bulb on Jeep Renegade? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos