Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the 2018 Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Service warning light

To reset the service light of the 2018 Jeep Compass, we must first turn on the instrument panel and immediately press the settings button to open the vehicle menu. From the menu, we must select the service option and enter the new kilometers until the next service, then press the RESET button. Once the reset is complete, the light will turn off, at which point we can turn off the instrument panel, wait a few minutes, then restart it to complete the reset procedure. If necessary, you can repeat the operation.

Posted on 12 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Engine Oil Light on a Jeep Compass
How to Reset the Engine Oil Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Today's guide will show you how to reset the engine oil service light on a Jeep Compass. First, get into the vehicle and turn on the ignition by pres…
How to reset the oil change light on the 2021 Jeep Compass
How to reset the oil change light on the 2021 Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In today's article, we will show you how to reset the oil change indicator light on the Jeep Compass 2nd generation. For this operation, no tools or …
How to reset the tire pressure warning light on the Jeep Compass
How to reset the tire pressure warning light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Let's discover the main steps that will allow us to reset the tire pressure light on the Jeep Compass; before performing the operation, it is necessa…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos