Do it yourself
| ||||
|
Jeep Compass - Video tutorial
Model: Jeep Compass
MK 2, 552
- Years 2016-2024 The Jeep Compass Service light reset operation is performed by turning on the instrument panel, to verify that the light is actually present on the instrument panel. Once this has been turned on, a diagnostic tool will need to be connected to the vehicle's OBD port, located under the steering column; after connection, it will be necessary to select the car model in question and its version in order to reset the warning light. After having followed the instructions shown in the tutorial it will be possible to disconnect the scanner, noting that the reset has taken place correctly.
Posted on 31 May 2023 by ScegliAuto
|
Frequently Asked QuestionsHow to reset the oil warning light on the Alfa Romeo GiuliettaIf you want to manually reset the oil change light on your Alfa Romeo Giulietta then this guide is all you need. You do not need any diagnostic tools and will be able to complete the whole procedure without any difficulty. First, go inside the car and make sure it is completely turned off. Then keep the accelerator pedal pressed and at the same time press the brake pedal six times consecutively. When finished, keep both pedals pressed and turn on the ignition. Press the brake pedal again six more times and keep both pedals depressed for approximately 50 seconds. Turn off the ignition. Release the brake pedal and hold the accelerator pedal for another 50 seconds to complete the procedure. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.018
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |