Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

The instructions in this guide will show you how to reset the service light for the regular maintenance of the engine oil change on the Jeep Compass. First, get inside the vehicle and press the accelerator pedal three times; turn off the instrument panel and start the engine, then wait for the service light to be definitively reset by the instrument panel, as shown in the video.

At this point, turn off the engine and start it again, verifying that the service light has been correctly reset!


Updated on 16 October 2026 by ScegliAuto


Related tutorials

How to reset the Service light on a 2018 Jeep Compass?
How to reset the Service light on a 2018 Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the Service light on the Jeep Compass, insert the ignition key and turn it to activate the instrument cluster. Once the cluster is on, press…
How to reset the Service light on a Jeep Compass?
How to reset the Service light on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) You can clear the Service light from the instrument cluster of the Jeep Compass by inserting the ignition key into the ignition switch and turning it…
How to Reset the "Service" Light on a Jeep Compass
How to Reset the "Service" Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Before starting, sit in the driver's seat of your Jeep Compass. Begin by activating the instrument cluster. Within the first ten seconds of turning o…

Other guides you may be interested in

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos