Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter on the Jeep Compass 2.4 Multiair

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Engine oil

See other generations:
Video tutorial

Today, learn how to drain and refill the engine oil on the Jeep Compass 2.4 Multiair, while also replacing the oil filter. First, raise the vehicle and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then, unscrew the oil filter cartridge using the appropriate tool, replacing it with a new one as shown in the video.

At this point, unscrew the filler cap and pour in the new engine oil, following the instructions in the owner's manual.


Updated on 5 October 2026 by ScegliAuto


Related tutorials

Replacing Engine Oil on Jeep Compass
Replacing Engine Oil on Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In today's video tutorial, you will learn how to replace the engine oil and its filter on a second generation Jeep Compass, performing the regular ma…
Guide to replacing the timing belt of the Jeep Compass 1.4 MultiAir
Guide to replacing the timing belt of the Jeep Compass 1.4 MultiAir
Jeep Compass (2016-2025 / 552, MK 2) In this guide, we will see the information related to the disassembly and replacement of the timing belt of the Jeep Compass 1.4 MultiAir. In order t…
How to Replace the Oil Filter and Engine Oil and Reset the Oil Light on a Jeep Compass
How to Replace the Oil Filter and Engine Oil and Reset the Oil Light on a Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) In this video tutorial, you can see how to replace the oil filter and engine oil and reset the oil light on a Jeep Compass. The first step is to lift…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos