Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on a Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

You can clear the Service light from the instrument cluster of the Jeep Compass by inserting the ignition key into the ignition switch and turning it to activate the instrument cluster. Once activated, press and hold the accelerator pedal while simultaneously pressing the brake pedal three times.

After this operation, release the pedals and turn off the instrument cluster. When the cluster is deactivated, turn it on again to check that the light has been reset.


Posted on 23 March 2026 by ScegliAuto


Related tutorials

Resetting the Service Light on a Jeep Compass
Resetting the Service Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this video tutorial, you will find instructions on how to reset the service light for the routine maintenance oil change on a second-generation Je…
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) When the tyre pressure warning light illuminates on the Jeep Compass display along with an audible signal, it means that at least one of the four tyr…
How to reset the service light on the Jeep Compass
How to reset the service light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) The instructions in this guide will show you how to reset the service light for the regular maintenance of the engine oil change on the Jeep Compass.…

Other guides you may be interested in

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos