Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

In this video tutorial, you will find instructions on how to reset the service light for the routine maintenance oil change on a second-generation Jeep Compass, following the steps outlined below. First, get into the vehicle and turn on the ignition; then, slowly press the accelerator pedal three times and turn off the ignition by pressing the button.

At this point, you will see that the service light has been reset, and you can drive the specified mileage interval before performing the next maintenance.


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Jeep Compass
How to Reset the Service Light on the Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) If you don't know how to safely and quickly reset the service light on your Jeep Compass, don't worry; just follow the instructions in this mini guid…
How to Reset the Engine Oil Light on a Jeep Compass
How to Reset the Engine Oil Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Today's guide will show you how to reset the engine oil service light on a Jeep Compass. First, get into the vehicle and turn on the ignition by pres…
How to Reset the Service Light on a Jeep Compass MK2
How to Reset the Service Light on a Jeep Compass MK2
Jeep Compass (2016-2025 / 552, MK 2) In this video, you will see how to reset the service light on a Jeep Compass MK2: the reset procedure does not involve pressing buttons on the dashbo…

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos