Do it yourself
| ||||
|
Jeep Compass - Video tutorial
Model: Jeep Compass
MK 1, MK 49
- Years 2006-2016 If you don't know how to safely and quickly reset the service warning light on your Jeep Compass, don't worry because you just need to follow the instructions in the following mini guide. First, turn on the car ignition and immediately press the accelerator pedal three consecutive times (within a time limit of ten seconds). Then turn off the ignition and the reset of the warning light is complete. For definitive confirmation, start the car and see if the warning light has really disappeared. In case of errors during the procedure, you can safely repeat the entire operation.
Posted on 16 August 2022 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the oil warning light on the Alfa Romeo GiuliettaIf you want to manually reset the oil change light on your Alfa Romeo Giulietta then this guide is all you need. You do not need any diagnostic tools and will be able to complete the whole procedure without any difficulty. First, go inside the car and make sure it is completely turned off. Then keep the accelerator pedal pressed and at the same time press the brake pedal six times consecutively. When finished, keep both pedals pressed and turn on the ignition. Press the brake pedal again six more times and keep both pedals depressed for approximately 50 seconds. Turn off the ignition. Release the brake pedal and hold the accelerator pedal for another 50 seconds to complete the procedure. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.013
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |