Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Jeep Compass MK2

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

In this video, you will see how to reset the service light on a Jeep Compass MK2: the reset procedure does not involve pressing buttons on the dashboard or the steering wheel, but only using the vehicle's pedals. First, close all the doors of the vehicle, then turn on the ignition.

Within a maximum of ten seconds, press and release the accelerator pedal fully three times. Turn off the ignition, and at this point, the procedure is complete.

Remember that the service indicator refers exclusively to the oil change.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Jeep Compass
How to Reset the Service Light on the Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) If you don't know how to safely and quickly reset the service light on your Jeep Compass, don't worry; just follow the instructions in this mini guid…
Using the Display of the Jeep Compass MK2 and Resetting the Service Light
Using the Display of the Jeep Compass MK2 and Resetting the Service Light
Jeep Compass (2016-2025 / 552, MK 2) In this video, you will learn how to use the display of the Jeep Compass MK2 and how to reset the service light. Use the controls on the left side of…
How to Reset the Service Light on Jeep Compass
How to Reset the Service Light on Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) To reset the service light on the Jeep Compass, get in the vehicle and press the ignition button once without starting the engine, which will turn on…

Other guides you may be interested in

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos