Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Use of the Jeep Compass MK2 display and resetting the service light

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Service warning light

In this video we see how to use the display of the Jeep Compass MK2 and then how to reset the service light. We use the controls found on the left side of the steering wheel to navigate through the menus and submenus, which we will scroll through with the arrows and confirm with the "ok" button. We will use the right and left arrows to browse the informative screens, and hold down the "ok" button to restore the displayed or selected functions. To reset the oil change light, we must follow this simple procedure: close all the doors of the vehicle, turn on the ignition and within a maximum time of ten seconds press and release the accelerator pedal three times. Turn off the ignition. Procedure completed.

Posted on 28 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on a Jeep Compass
Resetting the Service Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this video tutorial, you will find instructions on how to reset the service light for the routine maintenance oil change on a second-generation Je…
How to Remove the Expired Service Warning on the Jeep Compass
How to Remove the Expired Service Warning on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In today's video, we will see how to reset the expired service warning on the Jeep Compass (the procedure is identical for the Jeep Renegade): Start …
How to Reset the Oil Light on a Jeep Compass 2
How to Reset the Oil Light on a Jeep Compass 2
Jeep Compass (2016-2025 / 552, MK 2) If you own a Jeep Compass Mk2 (2016-2022) and want to manually reset the engine oil light that appears on the dashboard, carefully read the following…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos