Do it yourself
| ||||
|
Jeep Compass - Video tutorial
Model: Jeep Compass
MK 2, 552
- Years 2016-2024 In order to reset the Jeep Compass Service warning light, you need to insert the ignition key, turning it to turn on the instrument panel. Once this has been turned on, it will be necessary to keep pressed the accelerator pedal and at the same time it will be necessary to press the brake pedal three times. When this operation has been completed, it will be necessary to go and release the pedals by turning off the instrument panel. Once the instrument panel has been switched off, it will have to be switched on again to verify that the warning light has been reset correctly.
Posted on 11 November 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil warning light on the Alfa Romeo GiuliettaIf you want to manually reset the oil change light on your Alfa Romeo Giulietta then this guide is all you need. You do not need any diagnostic tools and will be able to complete the whole procedure without any difficulty. First, go inside the car and make sure it is completely turned off. Then keep the accelerator pedal pressed and at the same time press the brake pedal six times consecutively. When finished, keep both pedals pressed and turn on the ignition. Press the brake pedal again six more times and keep both pedals depressed for approximately 50 seconds. Turn off the ignition. Release the brake pedal and hold the accelerator pedal for another 50 seconds to complete the procedure. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.060
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |