Do it yourself
| ||||
|
Jeep Compass - Video tutorial
Model: Jeep Compass
MK 1, MK 49
- Years 2006-2016 To be able to reset the Jeep Compass Service spy you have to go and turn on the instrument panel without starting the car: at this point you will have to keep the accelerator pedal pressed. At the same time it will be necessary to press and release the brake pedal three times, never lifting the accelerator pedal. When the procedure has been completed, it will be possible to release both pedals and switch off the instrument panel. When this is turned on again, it will be possible to see that the Service warning light has been correctly reset.
Posted on 4 April 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the error of the VSC warning light and the ABS of the Toyota Rav4Let's see in this guide how to reset the error of the VSC warning light or the ABS of the Toyota Rav4, analyzing the possible causes. In fact, usually the VSC warning light appears almost always simultaneously with that of the ABS; it indicates a fault in the braking system, in particular in the brake pedal switch located behind the pedal, as shown in the video. Then we get on board the car, on the driver's side, and start by unhooking and removing our switch, disconnecting the electrical connector; then let's reassemble everything, checking that the errors have been cleared from the instrument panel! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.014
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |