Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the "Service" Light on a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Service warning light

Before you begin, sit in the driver's seat of your Jeep Compass. Start by pressing and holding the brake pedal, then activate the instrument cluster by pressing the appropriate button. While continuing to hold the brake pedal, press the accelerator pedal all the way down three times, then release both pedals. At this point, turn off the instrument cluster. When you reactivate the instrumentation, the "Service" light will no longer be illuminated, and you will have successfully completed the reset.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Compass (2006-2016 / MK 1, MK 49) In this video we can see how to reset the service light on a Jeep Compass MK1: first of all, we need to make sure that all the vehicle's doors are cl…
Jeep Compass (2016-2025 / 552, MK 2) In this video tutorial, you will find instructions on how to reset the service light for the routine maintenance oil change on a second-generation Je…
Jeep Compass (2006-2016 / MK 1, MK 49) On the Jeep Compass, resetting the oil service light is a very simple and quick operation. First, change the oil and the corresponding filter as per …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos