Do it yourself
| ||||
|
Jeep Compass - Video tutorial
Model: Jeep Compass
MK 2, 552
- Years 2016-2024 In order to reset the Jeep Compass Service light, you need to press the accelerator pedal all the way down three times consecutively, while the instrument panel is off. Once this operation has been carried out, you will need to press the ignition button so that the instrument panel turns on and you will need to navigate within the menu on the on-board computer using the controls on the left spoke of the steering wheel. If the warning light is still on on the instrument panel, just repeat the operation explained above until it disappears.
Posted on 31 May 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil warning light on the Alfa Romeo GiuliettaIf you want to manually reset the oil change light on your Alfa Romeo Giulietta then this guide is all you need. You do not need any diagnostic tools and will be able to complete the whole procedure without any difficulty. First, go inside the car and make sure it is completely turned off. Then keep the accelerator pedal pressed and at the same time press the brake pedal six times consecutively. When finished, keep both pedals pressed and turn on the ignition. Press the brake pedal again six more times and keep both pedals depressed for approximately 50 seconds. Turn off the ignition. Release the brake pedal and hold the accelerator pedal for another 50 seconds to complete the procedure. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.040
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |