Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the roof rails on the Jeep Compass MK2

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Checks and maintenance

In this video we see how to remove the roof rails from the Jeep Compass MK2 version. With a plastic spatula we remove the rubber cover located on the side of the car roof. We need to pry on the extreme side of the rubber strip, then we will find some clips to remove as we lift the strip: we must be careful not to break them, as they support the roof rack underneath the car roof. Once lifted, we will find the support bolts, which must be removed along the entire length of the component and then we can remove it completely. We will also need to repeat the process on the other side and we will have finished the job.

Posted on 3 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Where are the Fuses Located in the Jeep Compass?
Where are the Fuses Located in the Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) The fuses for the Jeep Compass are contained within the single fuse box installed in the vehicle: in this model, it is located in the engine compartm…
How to Install Roof Bars on a Jeep Compass?
How to Install Roof Bars on a Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) To install roof bars on a Jeep Compass, insert the support pins at the ends of the bars, so they can be secured with the appropriate screws. Once all…
How to replace the front headlight bulb of the Jeep Compass
How to replace the front headlight bulb of the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) These short and simple steps will allow us to disassemble and replace the low beam and high beam bulb of the front headlight of the Jeep Compass. Fir…

    Frequently Asked Questions

    • Compass 2006-2016 - What does "SDW not working" mean on the Jeep Compass? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos