Do it yourself
| ||||
|
Jeep Compass - Video tutorial
Model: Jeep Compass
MK 2, 552
- Years 2016-2024 If you own a Jeep Compass Mk2 (year 2016-2022) and you want to manually reset the engine oil warning light that comes on on the panel, all you have to do is read the following guide carefully and put into practice all the various steps. described. First, go inside the cockpit and make sure your Jeep Compass is completely off. Immediately insert the key, turn it to position one and fully depress the accelerator pedal three consecutive times. At this point, remove the key and insert it again to start the car and complete the reset procedure.
Posted on 12 October 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.068
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |