Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil change light on the 2021 Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

In today's article, we will show you how to reset the oil change indicator light on the Jeep Compass 2nd generation. For this operation, no tools or software are needed.

To reset the indicator light, simply turn on the ignition without starting the engine, then press the accelerator pedal three times all the way to the floor, and then turn off the ignition. Now, start the ignition and the engine to verify that the procedure was successful.

It is recommended to perform this procedure only after changing the oil in your Jeep Compass, and in case the control unit does not automatically reset the indicator light.


Posted on 25 February 2025 by ScegliAuto


Related tutorials

How to reset the oil change on the 2021 Jeep Compass
How to reset the oil change on the 2021 Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In the following article, we will see how to reset the oil change indicator light on the 2021 Jeep Compass. This operation will take less than 1 minu…
How to Reset the Oil Change Warning Light on the Jeep Compass
How to Reset the Oil Change Warning Light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this tutorial, follow the necessary steps to reset the service warning light for the oil change on the Jeep Compass. First, get inside the vehicle…
How to reset the oil light on a 2011 Jeep Compass
How to reset the oil light on a 2011 Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) Our video tutorials explain how to act independently in the face of a problem with your vehicles. Today's video is about resetting the oil light on a…

Other guides you may be interested in

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos