Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil change on the 2021 Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

In the following article, we will see how to reset the oil change indicator light on the 2021 Jeep Compass. This operation will take less than 1 minute, and it is recommended to do it only after having performed the service.

To reset the indicator light, first start the ignition without starting the engine, then within 5 seconds press the accelerator pedal all the way down or until it reaches the end of its travel for 3 times. After that, turn off the ignition, then restart it and start the engine.

Now the procedure will be complete and the system will have reset the oil change indicator light, which in this car model is also the service indicator light.


Posted on 6 October 2025 by ScegliAuto


Related tutorials

How to reset the oil change light on the 2021 Jeep Compass
How to reset the oil change light on the 2021 Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In today's article, we will show you how to reset the oil change indicator light on the Jeep Compass 2nd generation. For this operation, no tools or …
How to Reset the Oil Change Light on a Jeep Compass
How to Reset the Oil Change Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) The author of the video describes the correct procedure to reset the oil change light on a Jeep Compass without going to a garage or using profession…
Resetting the Service Light on the Jeep Compass
Resetting the Service Light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Follow these brief steps to reset the service light for the engine oil change maintenance on the Jeep Compass. First, get inside the vehicle and turn…

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos