Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

The author of the video describes the correct procedure to reset the oil change light on a Jeep Compass without going to a garage or using professional equipment. Here’s how to do it. After getting into the car and closing all the doors, insert the key and turn it to activate the instrument cluster.

At this point, within 10 seconds of turning on the cluster, press the brake pedal (and of course, release it completely) three times, then turn the key again to switch off the instrument cluster.


Updated on 10 October 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Change Light on a Jeep Compass
How to Reset the Oil Change Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Before you can start, sit in the driver's seat of your Jeep Compass. Begin by activating the instrument cluster without starting the engine by pressi…
How to Reset the Oil Light on the Jeep Compass 2022
How to Reset the Oil Light on the Jeep Compass 2022
Jeep Compass (2016-2025 / 552, MK 2) If, when you turn on the instrument cluster of your Jeep Compass second generation (2022), you notice the oil change warning light appearing despite …
How to reset the oil service light on the Jeep Compass?
How to reset the oil service light on the Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) On the Jeep Compass, resetting the oil service light is a very simple and quick operation. First, change the oil and the corresponding filter as per …

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos