Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Interior Light Bulbs in a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Instrument panel light

Learn how to remove and replace the damaged bulbs in the interior light of a Jeep Compass (new model): use a plastic lever to pry between the interior light and the headlining panel (without breaking anything); pull the interior light out of the panel and disconnect the power connector. Replace the damaged bulbs with new ones (same size and voltage). Refit the interior light into its housing (push the transparent plastic with your hands until the clips fully lock into the side plastic). Test the correct operation of the interior light after installation.

Updated on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Headlight Bulbs on Jeep Compass
Replacing Headlight Bulbs on Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Need to replace damaged front headlight bulbs on a Jeep Compass? Here’s how to do it. Open the bonnet by pulling the lever located at the bottom righ…
Removing the Interior Light on Jeep Compass mk2
Removing the Interior Light on Jeep Compass mk2
Jeep Compass (2016-2025 / 552, MK 2) Do you want to replace the cabin light bulbs with LED bulbs? Or do you just want to clean the light from dust and flies? This video will show you how…
How to Replace the Headlamp Bulbs on a Jeep Compass
How to Replace the Headlamp Bulbs on a Jeep Compass
Jeep Compass (2006-2016 / MK 1, MK 49) Follow these steps to replace the headlamp bulbs on a Jeep Compass: open the bonnet by pulling the lever located at the bottom right of the dashboard…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos