Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Number Plate Light Bulb on a Jeep Grand Cherokee

Model: Jeep Grand Cherokee MK 2, WJ - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: License plate light

See other generations:
Video tutorial

How do you replace the number plate light bulb on a Jeep Grand Cherokee? Follow these steps. Open the boot lid, and using a screwdriver, unscrew the securing screws of the plastic light unit located above the number plate.

Once the transparent light unit is removed, gently pull out the bulb with your fingers. Install the new bulb (same size and voltage) into the bulb holder, and refit the light unit into the boot lid. Finally, test the operation of the newly installed bulb.


Updated on 28 February 2026 by ScegliAuto


Related tutorials

How to Replace the Number Plate Bulb on the Jeep Grand Cherokee?
How to Replace the Number Plate Bulb on the Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To replace the number plate bulb on the Jeep Grand Cherokee, you need to lever the sides of the light unit that protects the bulb to loosen its two f…
How to Reset the Oil Light on a Jeep Grand Cherokee
How to Reset the Oil Light on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Before starting, sit in the driver's seat of your Jeep Grand Cherokee. Turn the key in the ignition switch without activating the instrument cluster.…
Where to Find the Fuse Box of the 2004 Jeep Grand Cherokee
Where to Find the Fuse Box of the 2004 Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WH, WK, MK 3) To independently locate the fuse box in your 2004 Jeep Grand Cherokee, carefully read the following guide where we will assist you step by step. Firs…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos