Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the maintenance interval of the Jeep Compass

Model: Jeep Compass MK 1, MK 49 - Years 2006-2016
Part: Service warning light

In this article, we will show you how to reset the maintenance interval on the Jeep Compass. This procedure is useful in case it is not reset by the workshop during servicing. To reset the warning light, which in this case is represented by the oil light, you need to turn on the instrument panel, then press the accelerator all the way down three times, and then restart the panel. As we have seen, the procedure takes less than 1 minute to complete and no external tools or software are needed for the reset.

Posted on 25 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service indicator light on the Jeep Compass?
How do you reset the Service indicator light on the Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the Service light of the Jeep Compass, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot: o…
Resetting the Service Light on a Jeep Compass
Resetting the Service Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this video tutorial, you will find instructions on how to reset the service light for the routine maintenance oil change on a second-generation Je…
How to reset the "Service" indicator on a Jeep Compass?
How to reset the "Service" indicator on a Jeep Compass?
Jeep Compass (2006-2016 / MK 1, MK 49) To reset the "Service" light on a Jeep Compass, start by turning on the instrument panel without starting the engine. Use the buttons on the steering…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos