Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on a Jeep Renegade.

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

Video tutorial

To perform the reset, you need an Android device with the Alfa OBD app installed and the PIN code for the interface, which is usually "1234." Insert the Bluetooth OBD2 interface into the port, turn on the ignition, and connect the Android device. Open the Alfa OBD app, which should already have the language set, select the brand (Jeep) and the model (Renegade), choose the function (engine), select the control unit, and tap "connect." Once connected, tap the vehicle icon with the hood open and go to "procedures," select "oil replacement," tap "start," and wait for the message "procedure completed successfully." Turn off the ignition, disconnect the app, and remove the OBD2 interface.


Posted on 3 December 2025 by ScegliAuto


Related tutorials

How to Reset the Oil Change Light on a Jeep Renegade
How to Reset the Oil Change Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) To reset the Oil Change light on the Jeep Renegade, turn on the ignition and navigate to the menu that shows the engine oil life. To reset the light …
How to Reset the Oil Change Light on a Jeep Renegade?
How to Reset the Oil Change Light on a Jeep Renegade?
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this tutorial, see how to reset the oil change light on a Jeep Renegade. This operation is very simple and quick, to be followed only after changi…
How to Reset the Oil Light on a Jeep Renegade
How to Reset the Oil Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) To reset the oil light on your Jeep Renegade, simply follow this guide step by step. First, enter the cabin and turn on the instrument panel, then pr…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos