Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Warning light – error code

To reset the Oil Change light on the Jeep Renegade, turn on the ignition and navigate to the menu that shows the engine oil life. To reset the light and return the oil life to 100%, press the accelerator pedal ten times while the ignition is off. When the ignition is turned back on, you can check the oil life again. If the light has not been reset correctly, repeat the process to turn off the light.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Light on a Jeep Renegade
How to Reset the Oil Change Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To reset the Oil Change light on a Jeep Renegade, press the engine start button without starting the engine, just turning on the instrument cluster. …
How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by pressing the vehicle's ignition button once, activating the instrument…
How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by pressing the vehicle's ignition button, which will turn on the instrum…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2021 - How to reset the Uconnect system in the Jeep Renegade? Read answer
    • Jeep Renegade 2014-2026 - What to do if the brake pad warning light appears on Jeep Renegade? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos