Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2023 Jeep Compass?

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

The video tutorial above demonstrates the standard method used primarily in garages to reset the service light and any other warning lights. Connect a PC via cable to the OBD port and then configure the car model using the appropriate software, establishing a direct connection with the ECU. There will be a series of intuitive steps that will guide you to the warning lights and alerts section, allowing you to perform the reset.

This process makes sense only after completing all scheduled maintenance tasks.


Posted on 3 February 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Jeep Compass
How to reset the service light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) The red oil warning light on a Jeep Compass vehicle must be reset after replacing the old engine oil with new oil. To reset the warning light, we mus…
How to Reset the Service Light on a 2018 Jeep Compass
How to Reset the Service Light on a 2018 Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) To reset the service light on a 2018 Jeep Compass, first turn on the ignition and then press the settings button to open the vehicle menu. From the m…
How to Reset the Service Light on a Jeep Compass
How to Reset the Service Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) After completing all routine maintenance tasks such as oil change, coolant replacement, filter changes, and tyre checks, you can proceed to reset the…

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos