Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years 2016-2025
Part: Service warning light

After completing all routine maintenance tasks such as oil change, coolant replacement, filter changes, and tyre checks, you can proceed to reset the service light. The model we will be working on is a 2021 Jeep Compass. Start the reset by turning on the ignition and pressing the accelerator pedal fully down five times. Next, release the pedal and ensure the light has turned off, as no reset confirmation message will be displayed. Repeat the process if necessary.

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Jeep Compass
How to reset the service light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) The red oil warning light on a Jeep Compass vehicle must be reset after replacing the old engine oil with new oil. To reset the warning light, we mus…
How to reset the service light on the 2018 Jeep Compass
How to reset the service light on the 2018 Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) To reset the service light of the 2018 Jeep Compass, we must first turn on the instrument panel and immediately press the settings button to open the…
How to reset the oil light on the 2019 Jeep Compass
How to reset the oil light on the 2019 Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Today we will see how to perform reset operations on a 2019 Jeep Compass vehicle. To reset the service light on the car, we need to: -turn on the ins…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos