Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

This short video tutorial shows how to reset the service light and remove the engine oil change notification on a second-generation Jeep Compass with automatic transmission and keyless ignition. First, briefly press the vehicle's start button to turn on the injection without starting the engine, then set the gearbox to park "P" mode.

Now, slowly press the accelerator pedal three times and finally press the start button again. If the oil change notification continues to appear, repeat the steps.


Updated on 19 June 2026 by ScegliAuto


Related tutorials

Reset the Service Light on a Jeep Compass
Reset the Service Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Let's look at the instructions and steps that will allow us to reset the service light for the regular maintenance oil change on the Jeep Compass. Fi…
How to Reset the Maintenance Light on Jeep Compass
How to Reset the Maintenance Light on Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) To reset the "Service" light on a Jeep Compass, follow these simple instructions. Get in the car, close all the doors, press the brake pedal with you…
How to Reset the Oil Change Warning Light on the Jeep Compass
How to Reset the Oil Change Warning Light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In this tutorial, follow the necessary steps to reset the service warning light for the oil change on the Jeep Compass. First, get inside the vehicle…

Other guides you may be interested in

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos