Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Service Light on a Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

Let's look at the instructions and steps that will allow us to reset the service light for the regular maintenance oil change on the Jeep Compass. First, get inside the vehicle and turn on the ignition; press the accelerator pedal down fully, then press the brake pedal three times, as shown in the video.

At this point, turn off the ignition and release the pedals; wait about ten seconds before turning the ignition back on, checking that the maintenance message has been correctly reset!


Posted on 30 April 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Jeep Compass
How to reset the service light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) The red oil warning light on a Jeep Compass vehicle must be reset after replacing the old engine oil with new oil. To reset the warning light, we mus…
How to Reset the Service Light on a 2018 Jeep Compass
How to Reset the Service Light on a 2018 Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) To reset the service light on a 2018 Jeep Compass, first turn on the ignition and then press the settings button to open the vehicle menu. From the m…
How to Reset the Service Light on a Jeep Compass
How to Reset the Service Light on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) After completing all routine maintenance tasks such as oil change, coolant replacement, filter changes, and tyre checks, you can proceed to reset the…

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos