Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Jeep Compass

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

See other generations:
Video tutorial

The red oil warning light on a Jeep Compass vehicle must be reset after replacing the old engine oil with new oil. To reset the warning light, we must turn on the instrument panel and press the accelerator pedal three times. Release the pedal and start the engine to complete the oil warning light reset procedure.

The same steps must be taken to reset the service light related to the car's maintenance. If the reset is not successful, it is necessary to check the oil tank sensors and possibly replace them.

If the problem persists, it is necessary to check the engine control unit.


Posted on 11 August 2025 by ScegliAuto


Related tutorials

How to reset the service light on the Jeep Compass MK1 version
How to reset the service light on the Jeep Compass MK1 version
Jeep Compass (2006-2016 / MK 49, MK 1) In this video we can see how to reset the service light on a Jeep Compass MK1: first of all, we need to make sure that all the vehicle's doors are cl…
How to reset the service on a Jeep Compass Hybrid
How to reset the service on a Jeep Compass Hybrid
Jeep Compass (2016-2025 / 552, MK 2) In this video, we will see how to reset the service light on a 2023 Jeep Compass Hybrid. We need to go behind the steering column, where there is a s…
How do you reset the Service light on the Jeep Compass?
How do you reset the Service light on the Jeep Compass?
Jeep Compass (2006-2016 / MK 49, MK 1) The Service light that appears on the instrument panel of the Jeep Compass can be reset by pressing the accelerator pedal all the way down three time…

Other guides you may be interested in

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos