Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Jeep Compass MK1 version

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

In this video we can see how to reset the service light on a Jeep Compass MK1: first of all, we need to make sure that all the vehicle's doors are closed, and that the front hood and trunk are also closed properly. Now we turn on the ignition, and within ten seconds, we press and release the accelerator pedal three times.

We can now turn off the ignition: the procedure is complete. Keep in mind that this procedure is only valid for resetting the service light after an oil change, and has no other application.


Posted on 16 January 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Jeep Compass?
How to Reset the Service Light on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the service light on a Jeep Compass, connect a diagnostic tool to the vehicle's OBD port, located just below the steering column. Once conne…
How to Reset the Service Light on a Jeep Compass?
How to Reset the Service Light on a Jeep Compass?
Jeep Compass (2016-2025 / 552, MK 2) To reset the Service light on a Jeep Compass, start by turning on the ignition to check that the light is present on the instrument cluster. Once the…
Resetting the Service Light on the Jeep Compass
Resetting the Service Light on the Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Follow these brief steps to reset the service light for the engine oil change maintenance on the Jeep Compass. First, get inside the vehicle and turn…

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos