Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Air Vents on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Air vents

Follow these steps to remove the air vents (side dashboard) on a Jeep Renegade. Use multiple levers (if necessary) to remove the vents. Pry at the top (as shown in the video) until you release the clips inside; detach the air vent and pull it out from the dashboard. Once you have pulled the vent outwards, remove the piece from the dashboard (pulling towards you); disassemble the other vents in the same manner as the previous one. Prepare to replace the air vent inside the dashboard.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Air Vents from the Centre Console of a Jeep Renegade
How to Remove the Air Vents from the Centre Console of a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you start, sit in the driver's seat of your Jeep Renegade. Begin by prising off and removing the radio frame. Next, remove the radio itself by…
How to Activate/Deactivate the Air Conditioning in a Jeep Renegade
How to Activate/Deactivate the Air Conditioning in a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To activate or deactivate the air conditioning on a Jeep Renegade, start the engine and locate the climate control buttons on the central console. Pr…
How to Replace the Cabin Air Filter of the Jeep Renegade
How to Replace the Cabin Air Filter of the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this guide, you will find instructions to remove and replace the cabin air filter of the Jeep Renegade. First, open the front passenger door and s…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos