Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Air Vents from the Centre Console of a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Air vents

Before you start, sit in the driver's seat of your Jeep Renegade. Begin by prising off and removing the radio frame. Next, remove the radio itself by unscrewing the relevant fixing screws and disconnecting the electrical connector. This will give you access to the internal screws that secure the central air vents, which you will need to unscrew and remove. At this point, dislodge and remove the air vents themselves, and you will have successfully completed the removal.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Air Vents on a Jeep Renegade
How to Remove the Air Vents on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Follow these steps to remove the air vents (side dashboard) on a Jeep Renegade. Use multiple levers (if necessary) to remove the vents. Pry at the to…
How to Activate/Deactivate the Air Conditioning in a Jeep Renegade
How to Activate/Deactivate the Air Conditioning in a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To activate or deactivate the air conditioning on a Jeep Renegade, start the engine and locate the climate control buttons on the central console. Pr…
How to Remove the Air Filter from a Jeep Renegade
How to Remove the Air Filter from a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Let’s see how to remove and replace the engine air filter on a Jeep Renegade. Open the car door, pull up the bonnet release lever located at the bott…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos