Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Diesel Filter Replacement on Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK, MK 3, WH - Years 2004-2010
Part: Diesel fuel filter

To replace the diesel filter on a Jeep Grand Cherokee, follow these steps. Open the car's door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet and secure it. Refill the engine with new oil. Lift the front bonnet and remove the soundproofing panel. Use a socket wrench to unscrew the large securing bolt of the container cap where the diesel filter is located. Install the new diesel filter inside the engine compartment. Start and test the vehicle.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Diesel Filter on a Jeep Grand Cherokee
Replacing the Diesel Filter on a Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) In this video tutorial, you will learn how to replace the diesel filter on a Jeep Grand Cherokee. The diesel filter should be replaced during the veh…
How to Open the Fuel Flap and Cap on the Jeep Grand Cherokee
How to Open the Fuel Flap and Cap on the Jeep Grand Cherokee
Jeep Grand Cherokee (2021-2026 / MK 5, WL) This guide provides the main instructions on how to open the fuel flap and cap on the Jeep Grand Cherokee. First, unlock the doors and press the righ…
How to Replace the Fuel Filter on a Jeep Grand Cherokee?
How to Replace the Fuel Filter on a Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Replacing the fuel filter on a Jeep Grand Cherokee is very simple; let's see how to do it in this tutorial. It is important to note that this model h…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos