Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb on Jeep Grand Cherokee

Model: Jeep Grand Cherokee WK2, MK 4 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Headlight bulb

See other generations:
Video tutorial

Is your front headlight bulb blown? Let's see how to replace it. Open the front bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Remove the air tube located near the back of the headlight. Remove the cover cap of the front headlight: you will find the bulbs with metal clips, pull the bulb holders out of the headlight and extract the damaged bulb with the help of a screwdriver.

Fit the new bulb (always the correct type and size) and insert the bulb holder into the headlight housing. Close the back of the headlight and reattach the air tube.


Updated on 19 March 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlamp Bulb on the Jeep Grand Cherokee
Replacing the Front Headlamp Bulb on the Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this video, learn how to dismantle and replace the front headlamp bulb on the Jeep Grand Cherokee by following these simple and quick steps. First…
How to Replace the Front Headlamp Bulbs in a Jeep Grand Cherokee?
How to Replace the Front Headlamp Bulbs in a Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) In this tutorial, you will see how to replace the front headlamp bulbs in a Jeep Grand Cherokee. For the driver's side, loosen the intake manifold cl…
How to Replace the Front Headlamp Bulb on a Jeep Grand Cherokee
How to Replace the Front Headlamp Bulb on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To replace the front headlamp bulb on a Jeep Grand Cherokee, open the bonnet to access the screws located inside the engine bay. Inside the headlamp,…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos