Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting Service Indicator for Upcoming Service (On-Board Computer Registration)

Model: Jeep Cherokee MK 2, XJ - Years: 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
Part: Service warning light

See other generations:
Video tutorial

The service reset procedure is manual and does not require any diagnostic tools. Near the overhead light, where the rear-view mirror is located, there are four buttons: the ones to use for the reset are "RESET" and "STEP". To perform the reset: 1. Turn on the ignition. 2. Press the "STEP" button until the maintenance interval is displayed. 3. Press and hold the "RESET" button until the SERVICE indicator on the instrument cluster display resets. 4. At this point, turn off the ignition and wait a few minutes for the memory to save.

After the procedure, turn the ignition back on and check that the SERVICE indicator is off.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

How to Reset the Maintenance Service on a Jeep Cherokee
How to Reset the Maintenance Service on a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) Learn how to reset the maintenance service on a Jeep Cherokee. This is a very simple operation: enter the vehicle, turn on the ignition with the appr…
How to reset the service light on a 2014 Jeep Cherokee
How to reset the service light on a 2014 Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) To reset the service light related to the car service on a 2014 Jeep Cherokee, we need to start the instrument panel and press the menu button on the…
How to Reset the Oil Warning Light on a Jeep Cherokee
How to Reset the Oil Warning Light on a Jeep Cherokee
Jeep Cherokee (2008-2012 / MK 4, KK) Resetting the service light on the Jeep Cherokee is a very simple operation that can be done independently, aided by our video tutorial. To reset the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos