Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How the Tyre Pressure Monitoring System Works on the Jeep Cherokee

Model: Jeep Cherokee KL, MK 5 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Instrument cluster

See other generations:
Video tutorial

In this video, you can see how the Tyre Pressure Monitoring System (TPMS) works on the Jeep Cherokee: if one of the tyres loses pressure, you will hear an audible signal and the warning light for a flat tyre with an exclamation mark in the centre will illuminate.

The display clearly shows which tyre it is and how much its pressure has dropped compared to the others; the reference label with the tyre pressures is located on the edge of the driver's door frame.

Even if the light comes on briefly and then goes off, the pressure must be checked; remember that tyre pressure changes with variations in atmospheric temperature, and the heat from operation also affects pressure. Once the pressure is restored, you may need to drive for a few miles to reset the light.


Updated on 7 October 2026 by ScegliAuto


Related tutorials

How to Use the Tyre Pressure Monitoring System in a Jeep Grand Cherokee
How to Use the Tyre Pressure Monitoring System in a Jeep Grand Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In this video, see how to use the Tyre Pressure Monitoring System (TPMS) on a Jeep Grand Cherokee: if the pressure of at least one of the four tyres …
Operation of the tyre pressure monitoring system on the Jeep Cherokee
Operation of the tyre pressure monitoring system on the Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) .. In this video, you will see how the tyre pressure monitoring system works on the Jeep Cherokee: if the tyre pressure decreases, you.. …
Where is the TPMS Computer Located on a 2014/2018 Jeep Cherokee
Where is the TPMS Computer Located on a 2014/2018 Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) On this version of the Jeep Cherokee, the TPMS control unit is located on the roof of the cabin, mounted inside the tailgate, in the passenger compar…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos