Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Cherokee

Model: Jeep Cherokee XJ, MK 2 - Years 1984-2001
Part: Door trim panel

Removing the door panel of a Cherokee? This operation is not too complex; here’s how to remove the front panel. Unscrew the screws in the space of the upper door opening lever and the screws in the handle. Unscrew the remaining screws inside the door panel and detach the retaining clips. Pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the opening cable). Remove the adhesive cover to access the inside of the door or replace the panel (if damaged).

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel and Handle of the Jeep Cherokee
How to Remove the Door Panel and Handle of the Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) These brief steps will show you how to remove and replace the door panel and handle of the Jeep Cherokee. First, open the front door and begin to dis…
Removing the Rear Door Panel of the Jeep Cherokee XJ
Removing the Rear Door Panel of the Jeep Cherokee XJ
Jeep Cherokee (1984-2001 / XJ, MK 2) This guide shows you how to remove and replace the rear door panel of the Jeep Cherokee XJ, first generation. First, open the rear door and start by …
Removing the Rear Door Panel of a Jeep Cherokee
Removing the Rear Door Panel of a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In this video, you will learn how to remove the rear door panel of a fourth-generation Jeep Cherokee in simple steps. First, open the rear door and r…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos