Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Door Panel of the Jeep Cherokee XJ

Model: Jeep Cherokee XJ, MK 2 - Years 1984-2001
Part: Door trim panel

This guide shows you how to remove and replace the rear door panel of the Jeep Cherokee XJ, first generation. First, open the rear door and start by unscrewing the fastening screws located inside the holes under the grab handle, using a cross-head screwdriver; then, pry the sides of the panel until it completely detaches, as shown in the video. At this point, disconnect the handle cable to permanently remove the door panel; all that remains is to refit everything by applying the reverse procedure!

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Door Panel of a Jeep Cherokee
Removing the Rear Door Panel of a Jeep Cherokee
Jeep Cherokee (2013-2023 / KL, MK 5) In this video, you will learn how to remove the rear door panel of a fourth-generation Jeep Cherokee in simple steps. First, open the rear door and r…
How to Replace the External Rear-View Mirror on the Jeep Cherokee?
How to Replace the External Rear-View Mirror on the Jeep Cherokee?
Jeep Cherokee (1984-2001 / XJ, MK 2) To replace the rear-view mirror on the Jeep Cherokee, remove the door panel by loosening the screw located inside the housing of the internal handle.…
How to Remove the External Handle of the Jeep Cherokee?
How to Remove the External Handle of the Jeep Cherokee?
Jeep Cherokee (1984-2001 / XJ, MK 2) To remove the external handle of the Jeep Cherokee, you first need to take off the door panel. This can be done by removing any plastic covers, unscr…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos