Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : Removing the Jeep Cherokee rear door panel

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee MK 5, KL - Years 2013-2023
Part: Door panel
Operation: Removing the Jeep Cherokee rear door panel

Let's see in this video how to remove the rear door panel of a fourth series Jeep Cherokee, in simple steps. First we open the rear door and we go to remove the plastic cover of the opening handle and also inside the grip handle; then we are going to unscrew the screws that we find below. At this point we begin to pry the sides of the panel, in several points, in order to unhook and remove it, as shown in the video; we just have to disconnect the handle cable and the electric connector of the window lifter button, if any!


Posted on 31 December 2023 by ScegliAuto



Removing the rear door panel of the Jeep Cherokee XJ
Jeep Cherokee (1984-2001 / XJ, MK 2) In this guide, let's see how to disassemble and replace the rear door panel of the first generation Jeep Cherokee XJ. First of all we open the rear d
How do you remove the exterior door handle on the Jeep Cherokee?
Jeep Cherokee (1984-2001 / XJ, MK 2) To remove the exterior handle from the Jeep Cherokee you must first remove the door panel. This can be done by removing any plastics present, unscrew
How to replace the outside rearview mirror on the Jeep Cherokee?
Jeep Cherokee (1984-2001 / XJ, MK 2) In order to replace the rear-view mirror of the Jeep Cherokee, the door panel must be removed by loosening the screw located inside the internal hand

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos