Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Grand Cherokee
    4. : How to insert the reduced on a Jeep Grand Cherokee

Jeep Grand Cherokee - Video tutorial

Model: Jeep Grand Cherokee ZG, ZJ, MK 1 - Years 1992-1998
Operation: How to insert the reduced on a Jeep Grand Cherokee

Before we can begin, we will have to go and sit in the driver's seat of our Jeep Grand Cherokee. So let's start by putting the gearbox in neutral. After that, we will have to pull the low gear lever all the way towards us. When we have completed this step, we will have to initially enter the second and immediately after the first. Once we have engaged the first, we will have successfully inserted the reduced. By doing this, our car will be able to tackle much more difficult climbs and obstacles, without any problems regarding a possible lack of power or lack of traction.


Posted on 7 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Grand Cherokee 2004-2010 - What problems on the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 2004-2010 - What to do when you have trouble starting on the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 2010-2021 - What problems does the Jeep Grand Cherokee Crd have? Read Answer
    • Grand Cherokee 2004-2010 - What problems on the Jeep Grand Cherokee 3 0? Read Answer
    • Grand Cherokee 2010-2021 - What are the problems of the Jeep Grand Cherokee 3.0 CRD? Read Answer
    • Grand Cherokee 2004-2010 - What is the cost of the service on the Jeep Grand Cherokee? Read Answer
    • Grand Cherokee 1992-1998 - Where is the chassis of a Jeep Grand Cherokee located? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos