Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Engage 4x4 on Jeep Grand Cherokee MK4

Model: Jeep Grand Cherokee WK2, MK 4 - Years 2010-2021

This brief guide will show you how to engage 4x4 or any other driving modes on the fourth series Jeep Grand Cherokee, as well as the Cherokee. First, get into the vehicle and start the engine; you will find all the different driving modes on the central console panel (if the vehicle is equipped with them). To engage 4x4, press the button located on the left; press it again to deactivate it: this applies to all modes (whether sand, snow, rock, or vehicle height adjustment).

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter in the Jeep Grand Cherokee 4
How to Replace the Cabin Filter in the Jeep Grand Cherokee 4
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) If the cabin air filter in your Jeep Grand Cherokee Mk4 (2010-2021) is excessively worn and you want to replace it yourself, follow these steps. Once…
How to Reset the Oil Light on a Jeep Grand Cherokee
How to Reset the Oil Light on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) Before starting, sit in the driver's seat of your Jeep Grand Cherokee. Turn the key in the ignition switch without activating the instrument cluster.…
How to Disable the Parking Sensors on a Jeep Grand Cherokee
How to Disable the Parking Sensors on a Jeep Grand Cherokee
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) This brief and simple guide explains how to activate or deactivate the parking sensors on a Jeep Grand Cherokee, following the instructions below. Fi…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos