Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery of a Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Key

Video tutorial

Start by pressing the black plastic button located on the top of the key for your Jeep Renegade. This will release the internal emergency physical key, which you can extract and remove.

Once done, insert the tip of the emergency key into the upper slot and lever it open. Once you have pried it open, you will access the flat battery.

Proceed to remove the battery, completing the disassembly. To fit the new battery, simply follow these instructions in reverse, and the replacement will be complete.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery in the New Jeep Renegade
How to Replace the Key Battery in the New Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) If you don’t know how to correctly replace the battery inside the smart key of your new Jeep Renegade, don’t worry as the procedure is simpler than y…
How to Replace the Remote Key Battery of the Jeep Renegade
How to Replace the Remote Key Battery of the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In today's video, see how to replace the exhausted battery in the keyless key of the Jeep Renegade. First, check if the vehicle opens and starts with…
How to Replace the Key Battery on a Jeep Renegade
Jeep Renegade (2014-2021 / ) Let's see how to replace the key battery on a Jeep Renegade. Get a new battery and a small flathead screwdriver. First, extract the metal key from th…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos