Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery in the New Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Key

If you don’t know how to correctly replace the battery inside the smart key of your new Jeep Renegade, don’t worry as the procedure is simpler than you think. First, ensure you have a small flathead screwdriver and a new CR 2032 button battery. Then, press the button on the back cover to release the physical emergency key. Next, open the cover with the screwdriver and proceed to replace the old battery with the new one.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Jeep Renegade?
How to Replace the Battery in a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the battery in a Jeep Renegade, open the bonnet to access the engine compartment: the battery is located inside, at the top right near the…
How to Replace the Key Fob Battery of the Jeep Renegade?
How to Replace the Key Fob Battery of the Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the key fob battery of the Jeep Renegade, lower the lever located at the back of the fob, just below the chrome cover. This will allow you…
How to Replace the Key Fob Battery on a Jeep Renegade
How to Replace the Key Fob Battery on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To replace the key fob battery on a Jeep Renegade, first, pull out the metal key from its slot by unlocking the release lever. Once extracted, insert…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why is the electronic key no longer detected in the Jeep Renegade? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos